Electrodes modified with poly(5-amino-1-naphthol)/Prussian blue (poly(5-NH2-1-NAP)/PB) hybrid films are able to electrochemically reduce H2O2 in medium containing an excess of Na+ cations. This is an important advantage for biosensing applications over electrodes in which only conventionally (electro) deposited Prussian blue is present. Consequently, the aim of this work was to examine the application of templates of ordered arrays of colloidal poly(styrene) spheres (800, 450 and 100 nm in diameter) to produce inverse opal structures of poly(5-NH2-1-NAP)/PB hybrid platforms, in an effort to study the influence of the increase in surface area/volume ratio and higher exposition of the mediator active sites on material performance during H2O2 determination employing the different sized porous structures. Moreover, since the accentuated hydrophilic character of poly(5-NH2-1-NAP)/PB also allows H2O2 electrochemical reduction in inner active sites, issues concerning the amount of mediator electrodeposited on the electrode were also reflected in the observed results.

Alterações morfológicas em superfícies de cobre resultantes da aplicação de um protocolo definido de potencial foram examinadas por microscopia eletrônica de varredura (MEV) e microscopia de força atômica (AFM). Os resultados mostraram uma boa correlação entre o tempo empregado na ativação do eletrodo, microestrutura resultante e a atividade eletroquímica.

Morphologic changes on copper surfaces upon applying an established potential protocol were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results showed a good correlation between the time employed in the electrode activation and the resulting microstructure and electrochemical activity.

Eletrodos macroporosos de MnO2 foram preparados por eletrodeposição assistida por molde de partículas esféricas coloidais de poliestireno. A molhabilidade desses filmes foi estudada por medidas de ângulo de contato. Medidas de voltametria cíclica foram realizadas com o objetivo de estudar o seu comportamento como eletrodo para supercapacitores. A capacitância específica obtida foi cerca de 60% maior que a obtida por um eletrodo liso, o que mostra que apesar de a molhabilidade do eletrodo macroporoso ser menor, ocorre alguma penetração do eletrólito pelos poros, aumentando a área eletroativa. Por fim, o eletrodo macroporoso apresentou excelente establidade eletroquímica, não sendo observada queda de capacitância após 1000 ciclos de carga e descarga.

Macroporous MnO2 electrodes prepared by template-assisted electrodeposition using spherical polystyrene colloidal particles are studied. The wettability of such electrodes by a LiClO4 aqueous electrolyte is measured by the contact angle technique. Cyclic voltammetry experiments are performed in order to evaluate the use of these electrodes for electrochemical capacitor applications. The specific capacity obtained is about 60% higher than that obtained for flat MnO2 surfaces showing that, in spite of the wettability being lower, some penetration of the electrolyte into the pores must occur, increasing the electroactive area with respect to the flat electrode. Furthermore, the macroporous electrode showed excellent electrochemical stability, with neither a capacitance decrease nor a loss of morphology, after 1000 cycles.